Vacuum Error Codes

  Fault messages are shown in the clock indicator of the robot vacuum cleaner’s display. Before resolving any faults with the robot vacuum cleaner, switch it off with the OFF switch on the side. Miele Scout RX1 Robot Vacuum Cleaner Error Codes Solution F1 "Wheel raised" fault Place the robot vacuum cleaner on a level floor surface. F2 "Floor not defined" fault Place the robot vacuum cleaner on a level floor surface. F3 "Dust box" fault Insert the dust box into the robot vacuum cleaner making sure it clicks into position. F4 "Drive wheels overloaded" fault Check whether the drive wheels have become dirty. Remove any threads and hairs. F5 "Brushes overloaded" fault Check whether the roller brush and the side brushes-have become dirty. Clean the roller brush and the side brushes. F6 "Motor overloaded" fault Empty and clean the dust box. Replace the exhaust filter. F7 Internal system fault Switch the robot vacuum cleaner off and t

  Philips Robot Vacuum Cleaner –  Model: FC9910 Error codes Solution E0 Rechargeable battery is empty Charge the robot. E1 Wheel lifted. The robot is stuck on a threshold or another height difference. Move it to a flat area. E2 Floor detection error. Move the robot to a flat area. E3 Dust container error. The dust container is not properly inserted. Insert the dust container properly. E4 Wheel motor overload. Check if there is any dirt (hair, fluff etc.) attached to the wheels. Remove the dirt. E5 Brush motor overload. Check if there is any dirt (hair, fluff etc.) attached to the roller brush or side brushes. Remove the dirt. E6 Robot motor overload. Clean the filters and empty the dust container. E7 Inner system error. Set the on/off switch to OFF and then set it to ON again. E8 Front wheel slipping or not moving. Check if the robot can move forward freely and if there are any objects that block its movements. Check if the front wheel can turn freely by turning the robot upside down a