Vacuum Error Codes

  To reduce the risk of electric shock, turn power switch off and disconnect plug from electrical outlet before performing maintenance or troubleshooting checks. Bissell Robot Vacuum Cleaner – LED Error Code (power LED flashes red) Error Codes Solution E1 The wheel is stuck. Remove vacuum from obstacles, and restart the power switch. E2 The top cover or dust bin is not installed properly. Install the top cover and dust bin properly. The unit will detect the error and fix automatically. If the unit does not fix automatically, turn the unit off and back on. E3 The bumper is stuck. Remove vacuum from obstacles. The unit will detect the error and fix automatically E4 The unit was lifted up from the floor. Put vacuum back on the floor. E5 The color of the floor is too dark Remove robot from the flooring. Use virtual wall to keep the robot off of the flooring. E6 The battery is not installed properly. Charging error. (Power switch is off) To install the battery properly, please refer to ...

  Roomba will tell you something is wrong with a two-tone “uh-oh” sound followed by a narrated voice. The  troubleshooting  light will also  blink . Refer to the chart below to resolve Roomba’s problem. If the  problem  is not resolved, visit global.irobot.com. To repeat Roomba’s error message, press the “ clean ” button. Error Codes What to do Error 1 Move Roomba to a new location, then press CLEAN to restart. Roomba is stuck with a wheel hanging down. Ensure Roomba’s wheels are firmly on the floor. If Roomba is stuck, start in a new location. If Roomba is not stuck, clean its side wheels of hair and debris. Push the wheels in and out, and check that they both turn freely. Error 2 Open Roomba’s extractor frame and clean extractors. Roomba’s extractors can’t turn. Remove and clean Roomba’s extractors and caps. Clean Roomba’s side wheels of hair and debris. Error 3 Uneven ground. Place on a flat surface, and then press Clean. The right wheel for Roomba is ha...

  When Bob faces an uncomfortable situation, he will notify you by displaying ERROR, coupled with a two-digit number on his screen. Each number corresponds to a certain issue Bob is having. Error Codes Solutions 00 Error Code 00 pertains to an issue with Bob’s left wheel. Start by checking the left wheel for jamming. Use the cleaning tool or compressed air to remove any dust or debris that may be jamming the left wheel. If this does not solve the problem and Bob still shows Error Code 00, perform a checkup test to see how the wheels respond to the test. 01 Error Code 01 pertains to an issue with Bob’s right wheel. Start by checking the left wheel for jamming. Use the cleaning tool or compressed air to remove any dust or debris that may be jamming the left wheel. If this does not solve the problem and Bob still shows Error Code 01, perform a checkup test to see how the wheels respond to the test. 02 Error Code 02 means Bob’s main brush is unable to move freely. Remove the main brush...

  When RoboVac encounters a problem, the red indicator on RoboVac will be flashing and you will hear the relevant voice prompts. Follow the voice prompts to solve the problems. Error Codes Solutions 1 Front bumper stuck. Front bumper is stuck. Tap it repeatedly to remove any dust; if not, then move the device to a new position and try again. 2 Wheel stuck. Check the wheel and move it to a new position. Wheel may be stuck or trapped. Clear any obstacles in the surrounding area and check the wheel for any trapped dust. Move the device to a new position and try again. 3 Side brush stuck. Side brush may be stuck. Please clean it and try again. 4 Rolling brush stuck. Remove and clean the rolling brush. Remove the rolling brush, roller joint, roller brush cover, and suction inlet to clean it. Once cleaned, place the items back into the device and try again. 5 Device trapped. Clear the surrounding area. Device is trapped. Clear any obstacles in the surrounding area and try again. 6 Device...